Fieldbus PCI-Card
Device YASKAWA Nordic
AB Part no.
Note
EtherCAT PCI-card, Slave AB3617
34790980 Only in
combination with
DX100/DX200
software
NetTool-DeviceNet (Network setup software) 8501405
NetTool-PROFIBUS (Network setup software) 8501401
ASI configuration cable
347583-80 (3
meters) (standard)
347583-81 (6)
347583-82 (9)
347583-83 (12)
347583-84 (15)
The delivered Fieldbus PCI-card kit comprises:
• PCI-card
• Software (drivers, GSD-files, EDS-files etc) Available on www.hms.se
The delivered Fieldbus NetTools comprises:
• Software
The NetTool-DeviceNet (Network setup software) also comprises
• Network adapter
1.4 Safety
This equipment is constructed, produced and tested according to the laws of the Member
States relating to the EMC-directive (2004/108/EC) as well as the LVD-directives (2006/95/EC)
YASKAWA Nordic AB’s responsibility does not cover errors or safety risks that may occur in
equipment connected to and/or installed in the machine, nor errors or safety risks that may
occur in the machine caused by equipment connected to and/or installed in the machine.
The machine must not be put into service until the complete production unit corresponds to
the laws of the Member States relating to machinery (2006/42/EC).
External cables must be connected according to our cable connection guide, see separate document.
Page 8 Reg.No. ME00107EN-02
To Next Page
Loading...
