YASKAWA NX100 Instruction Manual

Fieldbus PCI-Card
Anybus IPconfig
4.2.2 The module has IP address 0.0.0.0
If the module has IP address 0.0.0.0, check that DHCP is not set by mistake. If setting DHCP without
having a DHCP server the IP address shows up as 0.0.0.0. If using DHCP, the server gives IP
addresses dynamically to nodes on the network.
Reg.No. ME00107EN-02 Page 25

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C