YASKAWA NX100 Instruction Manual

Fieldbus PCI-Card
Configuration interface
Auto address
This command is used to enable/disable the automatic address programming feature.
Fig. 38 Auto address
Press [ESC] to cancel.
Save configuration
Fig. 39 Save configuration
Press [Enter] to store the current configuration, or press [ESC] to cancel.
Note
This command is not allowed in protected mode.
9.4.2 Change settings
This menu is displayed when a specific node has been selected in main menu commands 1 to 4.
Reg.No. ME00107EN-02 Page 47

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C