Yealink SIP-T56A - Placing Calls to Contacts

Customizing Your Phone
109
When you place a call to the contact or receive a call from the contact, the touch screen will
display the contact photo.
Placing Calls to Contacts
To place a call to a contact from the local directory:
1. Tap .
2. If the contact was added to a specified contact group, you can tap the contact group first,
and then do one of the following:
- Tap the desired contact.
 If only one number for the contact is stored in the local directory, the IP phone
will dial out the number.
 If multiple numbers for the contact are stored in the local directory, tap the
desired number to dial out.
- Tap after the desired contact.
 If only one number for the contact is stored in the local directory, tap Send to dial
out the number.