Getting Started
29
Wall Mount Bracket
Power Adapter (5.5mm DC plug)
Headset YHS32/YHS33
Note
Phone Installation
If your phone is already installed, proceed to Phone Initialization on page 33.
This section introduces how to install the phone:
1) Attach the stand
2) Attach the optional wall mount bracket
3) Connect the handset and optional headset
4) Connect the power
5) Connect the optional USB flash drive
We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in reduced performance.
To Next Page
Loading...
