Yealink SIP-T56A - Screen Saver

User Guide for SIP-T56A Smart Media Phone
70
Settings->Preference.
Note
Screen Saver
The screen saver will automatically start each time your phone is idle for a certain amount of
time. The screen saver is used to blank the screen or fill it with moving images or patterns. If you
connect a color-screen expansion module EXP50 to the IP phone, the screen saver will start or
stop on the phone and EXP50 synchronously.
The screen saver will be stopped when:
 Press any key.
 Tap the touch screen.
 Pick up or hang up the handset.
 There is an incoming call.
 A new prompt (e.g., missed call, new voice mail or forwarded call).
 The status of BLF key changes.
If your phone is idle again for a specified period of time, the screen saver will start again.
The SIP-T56A smart media phone supports four screen saver types: Clock, Colors, Photo Frame
and Photo Table.
If you set the screen saver type to Clock, the touch screen will display as below when screen
saver starts:
The SIP-T56A smart media phone screen size is 7 inches (Resolution: 1024x600). The EXP50
screen size is 4.3 inches (Resolution: 272x480). If the size of the custom picture doesn’t meet the
IP phone/expansion module screen size, the wallpaper will be stretched or/and zoomed out
according to the screen size.