User Guide for SIP-T56A Smart Media Phone
128
Headset Mode Activation/Deactivation
To activate the headset mode:
1. Press on the phone.
The HEADSET key LED illuminates solid green, and the icon appears on the status bar.
When you tap the line key or the Answer soft key to answer an incoming call, the call is
connected to your headset automatically. For more information on using the headset to answer
a call, refer to Answering Calls on page 254.
With the handset on-hook, enter the desired number and tap Send, the phone will then place a
call using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls on page 252.
To deactivate the headset mode:
1. Press again on the phone.
The HEADSET key LED goes out, and the icon disappears from the status bar.
Headset Prior
You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General
