Customizing Your Phone
127
You can tap the desired entry to place a call to the entry.
Note
System Customizations
Headset Use
If you want to use a YHS32/YHS33/USB headset, physically connect your headset to the phone
and activate the headset mode for use. For more information on physically connecting a
headset, refer to Phone Installation on page 29.
If you want to use a Bluetooth headset, activate the Bluetooth mode and then pair and connect
the Bluetooth headset with your phone. For more information on using a Bluetooth headset,
refer to Bluetooth Headset on page 130.
This section provides an introduction to wired headset use.
Note
The SIP-T56A smart media phone supports three types of headsets: YHS32/YHS33 headset, USB
headset and Bluetooth headset. You can connect up to three types of headsets at once. The IP
phone will use the headset by the priority: USB/Bluetooth headset>YHS32/YHS33 headset. If
both a Bluetooth headset and a USB headset are connected, only the last connected headset can
be used.
You can use USB headset to answer an incoming call directly without activating the headset
If you connect a Bluetooth-Enabled mobile phone to the IP phone, and enable the IP phone to
sync phone contacts. The IP phone will first search the contacts in the mobile contacts directory
then placed calls list. For more information, refer to Mobile Contacts on page 117.
To Next Page
Loading...
Need help?
General
