User Guide for SIP-T56A Smart Media Phone
286
- Make sure you have an active call and one or more calls on hold, drag one far-site window
to another far-site window.
The touch screen prompts the following:
Tap Transfer.
Then the active call is connected to the number of the held party.
Semi-Attended Transfer
Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode via Dsskey is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to Configuring Transfer Mode via DssKey on page 306.
To perform a semi-attended transfer:
1. Press or tap the Transfer soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press to dial out.
To Next Page
Loading...
Need help?
General
