Yealink SIP-T56A User Manual

User Guide for SIP-T56A Smart Media Phone
284
Call Transfer
You can transfer a call to another party in one of three ways:
 Blind Transfer: Transfer a call directly to another party without consulting.
 Semi-Attended Transfer: Transfer a call when the target phone is ringing.
 Attended Transfer: Transfer a call with prior consulting.
Blind Transfer
Before performing a blind transfer (except you use dial number method), make sure that the
transfer mode via Dsskey is configured as Blind Transfer. For more information on how to
configure it, refer to Configuring Transfer Mode via DssKey on page 306.
To perform a blind transfer:
1. Press or tap the Transfer soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press to complete the transfer.
- Enter the number you want to transfer the call to.
Tap Transfer.

Yealink SIP-T56A Specifications

General

Brand	Yealink
Model	SIP-T56A
Category	Telephone
Language	English