Customizing Your Phone
163
Default Account
To configure the default account via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Default Account.
3. Tap the Default Account field.
4. Tap the desired account in the pop-up dialog box.
5. Tap to accept the change or to cancel.
The label of the default account is displayed on the left of the status bar. The IP phone will use
this account by default when dialing out.
You can also tap the label of the default account, and then tap the desired account to be the
new default account.
Note
Default account is configurable via phone user interface only.
To Next Page
Loading...
Need help?
General
