User Guide for SIP-T56A Smart Media Phone
352
for MWI service.
To use this feature, you should also configure the voice
mail number.
Note
To configure subscribe for MWI via web user interface
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Subscribe for MWI.
4. Enter the period time in the MWI Subscription Period(Seconds) field.
5. Click Confirm to accept the change.
The IP phone will subscribe to the account number for MWI service by default.
To enable subscribe MWI to voice mail via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Subscribe for MWI.
4. Select Enabled from the pull-down list of Subscribe MWI To Voice Mail.
The phone will send SUBSCRIBE messages for MWI service to the account or the voice number
MWI service depending on the server. Contact your system administrator for more information.
To Next Page
Loading...
Need help?
General
