User Guide for SIP VP-T49G IP Phone
120
When you tap the line key or the Answer soft key to answer an incoming call, the call is
connected to your headset automatically. For more information on using the headset to
answer a call, refer to Answering Calls on page 163.
With the handset on-hook, enter the desired number and tap the Send soft key, the phone
will then place a call using the headset automatically. For more information on using the
headset to place a call, refer to Placing Calls on page 160.
To deactivate the headset mode:
1. Press again on the phone.
The HEADSET key LED goes out, and the icon disappears from the touch screen.
Headset Prior
You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General
