Yealink SIP VP-T49G

User Guide for SIP VP-T49G IP Phone
58
3. Tap the Add soft key.
4. Tap the Security Mode field.
5. Tap the desired value in the pop-up dialog box.
- If you select None or WEP:
1) Enter the desired profile name in the Profile Name field.
2) Enter the desired value in the SSID field.
3) Enter the desired password in the WPA Shared Key field.
- If you select WPA-PSK or WPA2-PSK:
1) Enter the desired profile name in the Profile Name field.
2) Enter the desired value in the SSID field.
3) Tap the Cipher Type field.
4) Tap the desired Cipher type (TKIP, AES or TKIP AES) in the pop-up dialog box.
5) Enter the desired password in the WPA Shared Key field.
6. Tap the Save soft key to accept the change.
Viewing the Wireless Network Information
To view the wireless network information:
1. Tap ->Basic->Wi-Fi.