User Guide for SIP VP-T49G IP Phone
38
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP VP-T49G IP phone supports up to
16 SIP/Cloud accounts (one for Yealink Cloud account), and one H.323 account (GK account). If
your phone is not registered, you may have to register it. For more information on how to
register your phone, refer to Account Management on page 145, Cloud Account Registration on
page 288 and/or H.323 Account Registration on page 295.
Touch Screen Display
Idle Screen Display
If the phone has successfully started up, the idle screen will be displayed. The following figure is
an example of what is displayed on the touch screen.
Displays the phone’s default account and icons.
Icons are displayed in the middle of the status bar.
For more information, refer to Icon Instructions on
page 18.
The label of the default account is displayed on the
left of the status bar.
If multiple accounts are already registered, tap and
To Next Page
Loading...
Need help?
General
