Customizing Your Phone
69
and display these pictures alternately.
4. Click Confirm to accept the change.
Power Saving
The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time.
The IP phone will exit power-saving mode if a phone event occurs:
Press any key.
Tap the touch screen.
Pick up the handset.
Hang up the handset.
There is an incoming call.
A new prompt (e.g., missed call, new voice mail or forwarded call).
If the screen saver is enabled on your phone, power-saving mode will still occur.
You can configure the following power-saving settings:
Office Hour
Idle TimeOut (minutes)
Note
Configuring the Office Hour via Web User Interface
Office Hour specifies the starting time and ending time in the office each day.
To configure the office hour via web user interface:
1. Click on Settings->Power Saving.
2. Select a desired day of the week.
Power saving is configurable via web user interface only.
To Next Page
Loading...
Need help?
General
