User Guide for SIP VP-T49G IP Phone
134
Receiving Mobile Phone Calls by Using the IP Phone
If your mobile phone is paired and connected with the IP phone, an incoming call to your
mobile phone is also shown on the IP phone.
To handle a mobile phone call by using the IP phone, do one of the following:
- Press , tap the Answer soft key or pick up the handset to connect to the call.
- Tap the Reject soft key to reject the call.
DSS Keys
There are two types of DSS keys: Line Keys and Programable Keys. Details will be introduced in
the following. The SIP VP-T49G IP phone supports 29 line keys and 7 programable keys.
Line Keys
You can assign predefined functionalities to line keys. You can also define a label for a line key
feature which will appear on the touch screen. Line keys allow you to quickly access features
such as recall and voice mail. The line key can indicate the monitored status when the line keys
are assigned with particular features, such as BLF. The default key type of line key 1-16 is Line.
The default key type of line key 17-29 is N/A, which indicates that this line key provides no
functionality until configuration.
You can also tap and hold the line keys on the idle screen to enter the line key configuration
screen directly.
To assign functionality to a line key via phone user interface:
1. Tap ->Features->DSS Keys.
2. Tap the desired line key.
3. Select the desired key type from the Type field.
4. (Optional.) Select the desired key event type from the Key Type field.
To Next Page
Loading...
Need help?
General
