User Guide for SIP VP-T49G IP Phone
156
configure a delay, where the phone will dial out the phone number automatically after the
designated period of time.
To enable the live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
The default delay time is 4.
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or tapping the line key. You can also configure a delay, where the phone will dial out the
hotline number automatically after a designated period of time.
To configure the hotline number via phone user interface:
1. Tap ->Features->Hot Line.
2. Enter the desired number in the Number field.
Live dialpad is configurable via web user interface only.
To Next Page
Loading...
Need help?
General
