Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
288
To configure the setup wizard:
1. Tap the desired Cloud platform.
2. Enter the desired value in the corresponding field (refer to Cloud Account Registration).
3. Tap the Log in soft key.
During the setup wizard, you can tap Skip>> to exit.
Cloud Account Registration
The SIP VP-T49G IP phone only support SIP account by default, after enabling the video
conferencing feature (refer to Video Conferencing), the IP phone can also support Cloud
account. The IP phone supports up to 16 Cloud accounts.
Yealink Cloud Account
After registering a Yealink Cloud account successfully, the Cloud phone book will appear on the
IP phone. For more information on Cloud phone book, refer to Cloud Phone Book on page 296.
Two methods of registering a Yealink Cloud account:
 PIN code: This method uses the user’s PIN code to register the Yealink Cloud account. The
PIN code consists of 9 numbers.
 Account: This method uses the user’s username (Cloud number) and password to register
the Yealink Cloud account.
You can obtain the Yealink Cloud account information from your Cloud enterprise administrator.
The Yealink Cloud account information contains PIN code, username (Cloud number) and
password. You can only register one Yealink Cloud account. Besides you can register one Yealink
Cloud account on up to five Cloud endpoints.

Yealink SIP VP-T49G Specifications

General

Brand	Yealink
Model	SIP VP-T49G
Category	IP Phone
Language	English