Advanced Phone Features
245
To check the storage space of the USB flash drive via phone user interface:
1. Tap ->USB->Storage Space.
Call Recording Using a Record Key
You can record calls by tapping a record key on the phone. The SIP VP-T49G IP phone supports
record and URL record.
Two ways of call recording:
Record: The phone sends a SIP INFO message containing a specific header “Record: on/off”
to trigger a recording.
URL Record: The phone sends an HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
Note
To configure a record key via phone user interface:
1. Tap ->Features->DSS Keys.
2. Tap the desired line key.
3. Tap the Type field.
4. Tap Key Event in the pop-up dialog box.
If you record a call using a USB flash drive, the recorded file will be stored in the USB flash drive.
For more information, refer to Call and Conference Recording Using a USB Flash Drive on page
238.
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place you are in. It is also very important to
have the consent of the person you are calling before recording the conversation.
Call recording is not available on all servers. Contact your system administrator for more
To Next Page
Loading...
Need help?
General
