Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
200
5) (Optional.) Enter the no answer forward on code or off code respectively in the
On Code or Off Code field.
4. Tap the Save soft key to accept the change or to cancel.
The icon on the status bar indicates that the call forward is enabled.
You can also swipe down from the top of the screen to enter the control center, tap FWD to
turn to the desired call forward setting screen according to the current forward type. If you
have not configured the call forward type, tapping FWD will turn to the Always Forward
setting screen.
To enable call forward in custom mode:
1. Do one of the following:
- Tap ->Features->Call Forward.
- Press when the phone is idle.
- Swipe down from the top of the screen to enter the control center and then tap FWD.
2. Tap the desired account.

Yealink SIP VP-T49G Specifications

General

Brand	Yealink
Model	SIP VP-T49G
Category	IP Phone
Language	English