User Guide for SIP VP-T49G IP Phone
222
side.
To configure anonymous call rejection via phone user interface:
1. Tap ->Features->Anonymous.
2. Tap the desired line.
3. Tap the On radio box in the Anonymous Rejection field.
4. (Optional.) Tap the On Code or Off Code radio box in the Send Rejection Code field.
5. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On
Code and Off Code field beneath the Send Rejection Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call rejection feature on the phone.
6. Tap the Save soft key to accept the change or to cancel.
Anonymous call rejection is configurable via web user interface at the path Account->Basic.
If phone B has anonymous call feature enabled and places a call to your phone, the call will be
rejected, and the touch screen of the phone B will display the following:
To Next Page
Loading...
Need help?
General
