Yealink SIP VP-T49G

User Guide for SIP VP-T49G IP Phone
26
Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10 for IPv4;
http://[2005:1:1:1:215:65ff:fe64:6e0a] or [2005:1:1:1:215:65ff:fe64:6e0a] for IPv6) in the address
bar of a web browser on your PC. The default administrator user name and password are both
“admin” (case-sensitive).
Note
The main options you can use to customize the IP phone via phone user interface and/or via
web user interface are listed in the following table:
Options
Phone User Interface
Web User Interface
Status
√
√
--IP Address
--MAC
--Firmware
--Network
--Phone
--Accounts
Basic Phone Settings
√
--Wallpaper
√
--Screen Saver
√
--Power Saving
×
--Site Name
√
--Backlight
√
--Language
√
--Idle Clock
√
×
--Time & Date
√
√
--Administrator Password
√
--Key as Send
√
--Phone Lock
√
--Audio Settings
--Ring Tones
√
--Key Tone
√
--Contact Management
--Local Directory
√
--Blacklist
√
--Remote Phone Book
×
--Mobile Contacts
√
×
--Cloud Phone Book
√
--Call History Management
√
√
--Search Source List in Dialing
×
√
--Bluetooth Headset
√
√
The access to the Advanced settings of the Account or Network via web user interface may be
blocked by the web browser (e.g., Chrome, Firebox) if you have installed “Adblock Plus plugin”.