Advanced Phone Features
275
2. Tap the item to select the active call.
The Cancel, CallPull, NewCall and Barge In soft keys appear when the active call is
highlighted.
3. Tap the Barge In soft key to interrupt the active call of phone A.
Party B may hear a warning tone and then set up a conference call with the other parties of
the active call.
4. Press , tap the Hold soft key or the EndCall soft key.
- If any party in the conference call presses , taps the Hold soft key, two-way voice
can be heard between the remaining parties.
- If party A or party B taps the EndCall soft key, the remaining parties are still connected.
If the other party (not the shared line party) taps the EndCall soft key, the conference
call is ended.
Call Pull
Call pull feature allows users to retrieve an existing call from another shared phone that is in
active or hold status. For example, when there is a call between phone A and phone C, you can
use call pull feature on phone B to retrieve this call from phone A. Then the call is established
between phone B and phone C.
To retrieve a call from another shared phone:
If there is an active call between phone A and phone C, do the following:
1. Long tap the desired line key on phone B.
To Next Page
Loading...
Need help?
General
