User Guide for SIP VP-T49G IP Phone
282
When receiving a new voice mail, the phone will play a warning tone. The power indicator LED
will slowly flash red, and the touch screen will prompt “n New Voice Mail(s)” (“n” indicates the
number of unread voice mails, e.g., 5 New Voice Mail(s)) and display an icon .
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
To configure voice mail access codes via phone user interface:
1. Tap ->Message->Set Voice Mail.
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
The icon on the status bar has a counter indicating the number of messages you haven’t
To Next Page
Loading...
