TG100 User Guide
18/75
8. Click Save and Apply Changes.
Configure Advanced Settings
You can configure advanced settings of the mobile trunk.
International Mobile Equipment Identity of this module, it’s unchangeable.
International Mobile Subscriber Identification of SIM card, it’s
unchangeable.
The SMS center of this SIM card, TG100 will generate this by default. You
can also input the number here for the carrier if it’s not the default one.
The carrier is connected by default. You can also choose manual mode if
this SIM card is supported by several carriers.
The band of this SIM card, you can choose PGSM900, DCS1800,
PCS1900, EGSM900/DCS1800, GSM850/PCS1900.
Unlock the SIM Card
If your SIM card has enabled PIN lock, you can unlock the SIM card on TG gateway.
Note: You cannot enable or disable the SIM PIN service on TG gateway.
Procedure
1. Navigate to Gateway > Mobile List > Mobile List, and click .
2. Click the Advanced Settings tab.
3. Enter your SIM card PIN in the PIN Code field.
Important: If you enter incorrect PIN for 3 times, you need to enter the PUK code
to unlock the SIM card. Yeastar TG gateway doesn’t support PUK code entering;
you can unlock the SIM card with PUK code on your mobile phone.
To Next Page
Loading...
Need help?
General
