TG100 User Guide
75/75
Delete System Logs
Procedure
1. Navigate to Status > Reports > System Logs.
2. Choose the desired system log file, click .
Capture Ethernet Packet
Yeastar TG gateway provides an integrated tool to help you capture Ethernet packet
on web interface. You can debug the system efficiently with this tool.
Procedure
1. Navigate to Status > Reports > System Logs > Packet Capture Tool.
2. Enter the target IP address.
3. Enter the target port.
4. Click Start.
The system will start to capture the Ethernet packet.
5. Click Stop to stop capturing packet.
6. Click Download to download the captured packet to your local PC and use
Wireshark to open the packet file.
To Previous Page
Loading...
Need help?
General
