TG100 User Guide
41/75
a. Click Test SMTP Settings.
The following window appears.
b. Enter an email address to receive the test email.
c. Click Test SMTP Settings.
The web page will prompt “Tested successfully” if the email settings are
correct.
7. Click Save and Apply Changes.
Configure Email to SMS Settings
Procedure
1. Navigate to SMS > SMS Settings > Email Settings.
2. Select the checkbox of Enable Email To SMS.
3. (Optional) Configure the following settings in the section of Enable Email to
SMS.
Enable Country Code: Enable the option if you want to add the country code
before the destination phone number, and select a country code from
Country Code.
Receive Email Interval: Set the interval of receiving emails from POP3
server.
Access Code: Set a PIN code to verify emails. The users need to send
emails with the correct PIN code.
4. Click Save and Apply Changes.
Send Email to SMS
To send an email to SMS, you need to send an email to the SMS email address of TG
gateway. The system will receive and forward the email to the GSM/3G port, so that
the email can be sent through SMS to the expected destinations.
Sending Email to SMS, the format of the email subject is as below:
port:[port];num:[number];code:[code];
To Next Page
Loading...
Need help?
General
