TG100 User Guide
25/75
7. Click Save and Apply Changes.
When a call reaches the selected GSM/3G trunk, the call will be routed to the desired
destination.
Set up an IP to Mobile Route (Register Trunk Mode)
Procedure
1. Navigate to Gateway > Routes Settings > IP to Mobile.
2. Click Add IP to Mobile Route.
3. Enter a name in the Route Name field.
4. Choose a register SIP trunk or a trunk group from Call Source field.
5. Choose a GSM/3G trunk from Call Destination field.
6. Enable Two Stage Dial.
a. Set Simple Mode to No.
b. Set Two Stage Dial to Yes.
To Next Page
Loading...
