TG100 User Guide
33/75
5. Click Save and Apply Changes.
AutoCLIP Route
Yeastar TG gateway can automatically record failed outgoing calls to AutoCLIP route
table. When the called person calls back, TG gateway will route the call directly to the
original caller's extension.
Set up AutoCLIP Route
Procedure
1. Navigate to Gateway > Routes Settings > AutoCLIP Settings.
2. Set Enable to Yes.
3. (Optional) Change the Keep Time. The system will keep the AutoCLIP records
for the configured time.
4. Click Save and Apply Changes.
Delete AutoCLIP Records
If you don’t want to route the incoming call to the original user, you can delete the
AutoCLIP record. Next time the called person calls back TG gateway, the call will not
be routed to the original user.
Procedure
1. Navigate to Gateway > Routes Settings > AutoCLIP Settings.
2. Select the desired AutoCLIP record, click Delete The Selected.
To Next Page
Loading...
Need help?
General
