TG100 User Guide
43/75
3. Click Save and Apply Changes.
Send USSD Messages
Unstructured Supplementary Service Data (USSD) is sometimes referred to "Quick
Codes" or "Feature codes". You can send USSD messages to subscribe services
from the GSM/3G carriers.
Send a USSD Message
You can select the GSM/3G port, and send USSD messages to the GSM/3G carrier.
Procedure
1. Navigate to SMS > SMS > USSD.
2. Select the port, and enter the USSD messages in the USSD Request field.
3. Click Send.
Exit USSD Sessions
When you want to subscribe a new service from the GSM/3G carrier, you need to exit
the former USSD sessions first.
Procedure
1. Navigate to SMS > SMS > USSD.
2. Selected the port.
3. Click Exit USSD Session.
Enable TG Gateway API
Yeastar TG gateway supports sending and receiving SMS messages with third party
software. You need to connect the third party software with TG gateway via API.
Procedure
1. Navigate to SMS > SMS > API Settings.
To Next Page
Loading...
Need help?
General
