Yeastar Technology TG100 - Secure Your Gateway; Security Center; Configure Alert Settings

TG100 User Guide
64/75
Secure Your Gateway
 Security Center
 Configure Alert Settings
 Upload Certificate Files
 Configure Firewall Rules
Security Center
You can check TG gateway security configurations in “Security Center” page. You can
also enter the relevant security settings page rapidly.
Check descriptions of the service port as below.
Option
Description
SIP UDP Port
UDP Port used for SIP registrations. The default port is 5060.
HTTP Bind Port
Port for logging in the web interface. The default port is 80.
SIP TCP Port
TCP Port usSed for SIP registrations. The default port is 5060.
SIP TLS Port
TLS Port used for SIP registrations. The default port is 5061.
SSH
SSH port is used to access S-Series underlying configurations to
debug the system. The default port is 8022.
Note: We recommend that you disable SSH if you do not need it.
FTP
With FTP service, you can connect to PBX via web browser. The
default port is 21.
Configure Alert Settings
You can set email notification or call notification for system IP attack and Web attack.
Option
Description
PHONE Notification
Whether enable phone notification
Number
Set the phone number to receive alarm notifications.
Port
Choose the GSM/3G port to dial alert call.
Attempts
The attempts to dial a phone number when there is no answer.
Interval
The interval between each attempt to dial the phone number.
Must be longer than 3 seconds, the default value is 60 seconds.
Prompt
Users will hear the prompt while receiving the phone notification.