TG100 User Guide
46/75
7. Click Reboot Now to reboot the TG gateway.
Upload Custom Prompts
The default voice prompts and announcements in the system are suitable for almost
every situation. However, you may want to use your own voice prompt to make it more
meaningful and suitable for your case. In this case, you need to upload a custom
prompt to the system and apply it to the place you want to change.
Prerequisite
Yeastar TG gateway supports “.WAV”, “.wav”, and “.gsm” audio file. The audio file size
must be smaller than 1.8 MB. The supported wav file format:
pcm 8kHz, 16bit, Mono, 16Kb/s
alaw/ulaw 8kHz, Mono, 1Kb/s
gsm 6.10 8kHz, Mono, 1Kb/s
Procedure
1. Navigate to System > System Preferences > Custom Prompts, click Upload a
Prompt.
The following window appears.
2. Click Choose File to choose a file from your local PC.
3. Click Upload to start uploading the file.
After uploaded, the file name will be displayed on the Custom Prompts page.
Set up System Email
To receive email notifications, you need to set up the system email. The system email
is used to send alert event emails.
To Next Page
Loading...
Need help?
General
