TG100 User Guide
65/75
Configure IP Attack Alert Settings
When the TG gateway is attacked by an IP address, the system will add the IP to IP
Blacklist and send email notification or call notification to the desired users.
Procedure
1. Navigate to System > Security Center > Alert Settings, choose IPATTACK and
click .
2. Configure the Phone Notification Settings.
a. If you want to enable phone notification, set Phone Notification to Yes.
b. Select the GSM/3G Port to make outbound calls.
c. Enter the Number to receive call notification. You can set up multiple
extensions and outbound phone numbers. Separate phone numbers by “;”.
d. (Optional) Change the alert call attempts, interval, and alert prompt.
3. Configure the E-mail Notification Settings.
a. If you want to enable e-mail notification, set E-mail Notification to Yes.
b. In To field, enter the email address to receive alert emails. You can set
multiple email addresses, and separate them by “;”.
c. (Optional) Change the e-mail subject and the e-mail template.
4. Click Save and Apply Changes.
Configure User Lockout Alert Settings
The system will lock the user’s IP address after 5 failed web login attempts, and send
notification to the desired users.
Procedure
1. Navigate to System > Security Center > Alert Settings, choose WEBLOGIN and
click .
2. Configure the Phone Notification Settings.
a. If you want to enable phone notification, set Phone Notification to Yes.
b. Select the GSM/3G Port to make outbound calls.
c. Enter the Number to receive call notification.
d. (Optional) Change the alert call attempts, interval, and alert prompt.
3. Configure the E-mail Notification Settings.
a. If you want to enable e-mail notification, set E-mail Notification to Yes.
b. In To field, enter the email address to receive alert emails.
c. (Optional) Change the e-mail subject and the e-mail template.
4. Click Save and Apply Changes.
To Next Page
Loading...
Need help?
General
