TG100 User Guide
31/75
call will fail.When the number 15880270666 reaches the TG gateway, the call will
also fail.
Callback
Callback feature allows callers to hang up and get called back to TG gateway.
Callback feature can reduce the cost for users who work out of the office using their
own mobile phones.
Set up Callback for Specific Numbers
Callback feature is disabled on the TG gateway by default. The system only calls back
the permitted numbers. You need to enable Callback on the “Mobile to IP” or “IP to
Mobile” setting panel.
Note:
No callback rule is needed if the trunk supports call back with the caller ID directly.
Procedure
1. Navigate to Gateway > Routes Settings > Callback Settings.
2. Click Add Callback Number.
3. Enter the desired number.
4. Click Save and Apply Changes.
5. Enable Callback on “Mobile to IP” route or “IP to Mobile” route.
a. Set Simple Mode to No.
b. On the Match Incoming Calls section, set Enable Callback to Yes.
6. Click Save and Apply Changes.
Set up Callback for All Numbers
You can enable callback feature for all numbers. When anyone calls in TG gateway