TG100 User Guide
29/75
desired destination.
Set up an IP to Mobile Route (Peer Trunk Mode)
Procedure
1. Navigate to Gateway > Routes Settings > IP to Mobile.
2. Click Add IP to Mobile Route.
3. Enter a name in the Route Name field.
4. Choose a service provider trunk or a trunk group from Call Source field.
5. Choose the GSM/3G trunk from Call Destination field.
6. Click Save and Apply Changes.
A PBX user can make a call through the selected GSM/3G trunk.
Block Incoming Numbers
You can block the incoming calls from TG gateway to your PBX. When the blocked
user calls to the GSM/3G trunk on TG gateway, the system will block the call.
Procedure
1. Navigate to Gateway > Routes Settings > Blacklist.
2. Click Add Blacklist.
3. Enter the desired number.
4. Set the Type to Inbound.
To Next Page
Loading...
