Yeastar Technology TG100 User Manual

TG100 User Guide
57/75
3. Select desired trunks to the Selected box.
4. Click Save and Apply.
Configure SIP Settings
It is wise to keep default settings provided on the system. However, for a few settings,
you need to change them to suit your situation.
Configure SIP General Settings
Navigate to Gateway > VoIP Settings > SIP Settings > General, configure the SIP
general settings.
Check the description of SIP general settings below.
Option
Description
UDP Port
Port used for SIP registrations, the default is 5060.
TCP Port
Port used for SIP registrations, the default is 5060.
TLS Port
Port used for SIP registrations, the default is 5061.
TLS Verify Server
Whether to verify server’s certificate when TG100 works as a
TLS client. By default, it is set to “No”.
TLS Verify Client
Whether to verify client’s certificate when TG100 works as a
TLS server. By default, it is set to “No”.
TLS Ignore Common
Name
Set this parameter to “No”, then common name must be the
same as IP or domain name.
TLS Client Method
Specify the protocol for outbound TLS connections when
TG100 works as TLS client.
 tlsv1
 sslv2
 sslv3
RTP Port Start
Beginning of RTP port range.
RTP Port End
End of RTP port range.
DTMF Mode
Set default mode for sending DTMF. The default value is
rfc2833.
 rfc2833
 Info
 Inband
 auto
Max
Registration/Subscriptio
n Time
Maximum duration (in seconds) of a SIP registration. The
default value is 3600.
Min
Registration/Subscriptio
n Time
Minimum duration (in seconds) of a SIP registration. The
default value is 60.

Yeastar Technology TG100 Specifications

General

Brand	Yeastar Technology
Model	TG100
Category	Gateway
Language	English