IM 701510-01E
15-2
15.1 Troubleshooting
SCSI Menu not displayed
The connection to DL1520L is incorrect.
Connect the cable properly.
Symptom Possible Cause Corrective Action Reference Page
3-3
-
SCSI device not recognized
ID No. is not set to "5."
The order in which the power switches
are turned ON is incorrect.
Mismatch in the media format.
Set ID No. to "5."
Turn the power ON in the following
order: SCSI device - DL1520L.
Format the media with the DL1520L.
3-3
3-6
13-2
Data can not be saved to
the SCSI device.
Media not formatted. Format the media with the DL1520L. 13-2
Media is not inserted properly.
Check the direction of the media,
and insert properly.
Data can not be loaded
from the SCSI device
Media is not inserted properly.
Check the direction of the media,
and insert properly.
-
To Next Page
Loading...
