10-10
IM 701510-01E
10.6 Entering a Comment
1. Press the SHIFT + COPY (MENU) key to display the hardcopy
setting menu.
Entering comments
2. Press the “Keyboard” soft key to display the keyboard.
“CENTR” menu is also provided with DL1520/DL1520L with suffix
code -C3.
3. Use the keyboard to enter the comment. For details regarding the
usage of the keyboard, refer to page x.x.
Displaying comments
4. Press the “Comment” soft key to select “ON”. Pressing the soft key
once again results in “OFF”.and therefore comments will not be
displayed.
Explanation
Number of characters which can be entered
Up to 25 characters may be entered.
Displaying a comment
The comment will appear above the waveform display frame, as shown in the figure below.
Comment
Clearing the comment
Press the “EXEC” soft key in the hardcopy setting menu or display another menu. The
comment will be cleared.
Points to note when entering a comment
The displayed comment may overlap the messages which occur during waveform
acquisition. When you want to display the comment in such a case, turn off data acquisition,
and set the “Comment” setting on the hardcopy setting menu to “ON” once again.
Keys and Procedure
COPY(MENU) key
SHIFT key
Soft keys
To Next Page
Loading...
Need help?
General
