21-5
IM DLM3054-01EN
Network Drive (Net Drive)
You can save waveform data and setup data to a network drive.
FTP Server (FTP Server)
Specify the IP address of the FTP server (network drive) for saving waveform and setup data. In a network with
a DNS server, you can specify the host name and domain name instead of the IP address.
User Name (User Name)
Set the user name (login name) for logging in to the network drive. The characters that you can use are all the
ASCII characters on the keyboard. You can use up to 14 characters.
Password (Password)
Specify the password that corresponds to the login name. The characters that you can use are all the ASCII
characters on the keyboard. You can use up to 14 characters.
Passive Mode (Passive)
Turn FTP passive mode on or off.
In passive mode, the FTP client sets the port number for data transfer. Enable passive mode when you have set
an external FTP server as a network drive or when you are accessing an FTP server through a firewall.
Timeout (Timeout)
If the instrument cannot transfer files for a certain amount of time, it disconnects from the FTP server.
Selectable range: 0 s to 60 s
Connecting to the Network Drive (Connect/Disconnect)
When you press the Connect button, the instrument connects to the specified network drive, and the drive
appears in the file list (File List). When you press the disconnect button, the network drive is disconnected and
removed from the file list (File List).
21 Ethernet Communication (Network)
To Next Page
Loading...
Need help?
General
