3-4 IM 04L20A01-01E
Switching Operation Mode to Basic Setting Menu
1. Press the MENU key to display the setting menu.
2. Press the FUNC key for at least 3 seconds.
Note
• You cannot switch to basic setting mode while data is being acquired to the internal memory,
while computation is in progress, or while the external storage medium is being accessed.
Stop the data acquisition to the internal memory and computation before switching to basic
setting mode.
• If you change the settings under [#3 Memory] or [#4 Memory and trend, Memory timeup]
(excluding memory time up items) in basic setting mode, save the new settings and return to
operation mode, the measured data in the internal memory is cleared. Save important data to
the external storage medium before entering basic setting mode.
Switching Screens on the Operation Mode
You can change the operation screens according to your needs by carrying out the
following procedures.
Procedure
Operation Keys
1. Press the DISP/ENTER key to show the screen menu.
2. Select the menu item using the up and down arrow keys.
3. Press the right arrow key to display the sub menu.
To close the sub menu that you opened, press the left arrow key.
4. Select the sub menu item using the up and down arrow keys.
5. Press the DISP/ENTER key.
The selected display appears.
To close the menu without switching the display, press the ESC key.
1
45
23
Screen menu
Sub menu
3.2 Basic Key Operations
To Next Page
Loading...
Need help?
General
