Zebra Z4Mplus User Manual

Specifications
Media Specifications
Z4Mplus and Z6Mplus User Guide 117
Black mark
dimensions
Vertical length 0.98 in. to
0.453 in.
2.5 to
11.5 mm
0.98 in. to
0.453 in.
2.5 to
11.5 mm
Horizontal width > 0.37 in. >
9.5 mm > 0.37 in. > 9.5 mm
Location within 0.40 in. (1 mm) of inside media edge
May also be
centered from
0.23 in.
to
2.25 in.
from the
media inner
edge
May also be
centered from
5.84 mm
to
57 mm
from the
media inner
edge
May also be
centered from
0.23 in.
to
3.5 in.
from the
media inner
edge
May also be
centered
from
5.84 mm
to
90 mm
from the
media inner
edge
Density, in Optical Density Units (UDO) > 1.0 ODU
Maximum media density <
0.5 ODU
Transmissive Sensor Fixed 7/16 in. (11 mm) from inside edge
Media Specifications Z4Mplus Z6Mplus

Zebra Z4Mplus Specifications

General

Print Method	Thermal transfer or direct thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Length	39 inches
Max Print Speed	10 inches per second
Memory	4 MB Flash, 8 MB DRAM
Interface	Parallel, Serial
Media Sensors	Reflective and transmissive
Media Width	0.79 inches to 4.5 inches
Media Length	0.38" (9.6 mm) to 39" (991 mm)
Ribbon Width	2 inches to 4.33 inches
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F to 105°F
Storage Temperature	-40 to 140°F (-40 to 60°C)
Humidity	20 to 85% non-condensing