Zebra ZXP 1 Series User Manual

5: Replacement Procedures
Removal Sequence
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 103
5.3 Removal Sequence (continued)
PRINT ENGINE
5.6.28
Lid Sensor
page 153
5.6.29
Linkage (Left
Side)
page 154
5.6.23
Linkage (Right
Side)
page 143
5.6.30
Rocker (Left Side)
page 155
5.6.24
Rocker (Right Side)
page 144
5.6.26
Ribbon Take-Up
Motor
page 148
5.6.25
Printhead Lift
Motor
page 147
5.6.31
Stepper Motror
page 161
5.6.40
Drive Roller
Assembly
page 182
5.6.38
Platen Roller and
Exit Roller
page 178
5.6.34
Mag Encoder
Assembly
page 173
5.6.39
ATM Card Feed
Sensor
page 181
5.6.35
Mag Sensor
page 175
5.6.36
Card Sync Sensor
page 176
5.6.33
Pressure Rollers
(Front and Back)
page 169
5.6.32
Printhead Lift Cam
page 163

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm