P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 185
6
Preventive Maintenance
6.1 Cleaning the System
Your Printer includes a simple cleaning system using pre-saturated cleaning cards. The regular
use of these cards will clean and maintain important parts of your printer that cannot be
reached: including the Printhead, the Transport Rollers, and the Magnetic Encoder Station
(optional feature).
To order ZXP Series 1 cleaning supplies, go to
www.zebra.com/supplies for details.
6.1.1 When to Clean
Clean the Printer when:
• Print quality has been degraded.
• The LCD panel displays the message
CLEAN PRINTER.
• You experience mag encoding failures.
N
Caution • PROTECT YOUR FACTORY WARRANTY!
The recommended maintenance procedures must be performed to maintain your factory
warranty. Other than the recommended cleaning procedures described in this manual,
allow only Zebra authorized technicians to service the Printer.
NEVER loosen, tighten, adjust, or bend, etc., a part or cable inside the printer.
NEVER use a high-pressure air compressor to remove particles from the printer.
To Next Page
Loading...
Need help?
General
