Zebra ZXP 1 Series User Manual

3: Theory of Operation
Card Path Elements
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 83
3.3 Card Path Elements
The figure below shows the rollers that transport cards as they make their way through the
Printer. The rollers keep the card on a horizontal path, reducing the chance of a card edge
catching on anything.
The figure below shows the relative locations of the sensors that track card and ribbon position
and movement.
Card Transport
Rollers
Cleaning Rollers
Platen Roller
Exit Rollers Main Drive
Rollers
Feeder Roller
ATM Card Feed
Sensor J12
Feed Cover
Sensor J8
Ribbon Flag Position
Sensor J6
Card Sync
Sensor J9
Color Ribbon
Sensor J5
Transport Position Sensor J11
(on Card Transport)
Mag Encoder
Sensor J23
Lid Sensor J7
(on left side)
Card Load Sensor J10
(on Card Transport)

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm