Zebra ZXP 1 Series User Manual

46 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
2: Installation and Setup
Changing the Printer Driver Options
Security Tab
This is the standard Windows security screen, showing user access to various printer control
options. Both Print and Manage Printers must be checked for full functionality of the printer.
To access the Security tab, select Start > Devices and Printers. Right click on the Zebra ZXP
Card Printer listing. Select Printer properties > Security.
The Security tab allows you to assign the actual permissions that apply to the print queue.
You can apply permissions to both users and to groups. It is usually considered a better
practice to only apply security to groups.
Both “Print” and “Manage this printer” Allow checkboxes must be selected to ensure full
functionality of the printer.
The Advanced Security Settings properties sheet allows you to assign a more comprehensive
set of permissions than the basic Security tab found on the printer’s properties sheet does.
For details on security settings, click on the Learn about access control and permissions link
(arrow above).

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm