Zebra ZXP 1 Series User Manual

234 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
G: Upgrade Kit Instructions
Removal
Step 1. With a TORX T10 driver, remove the four screws (arrows below) holding the
Ethernet Plate to the Ground Plate.
Step 2. Remove the Ethernet PCBA and Plate.
Replacement
Replacement is performed by reversing the removal steps.

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm