Zebra ZXP 1 Series User Manual

190 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
A: Model Numbers
The Part Number of a particular Zebra ZXP Series 1 Card Printer is shown on a label affixed to
the bottom of the printer; that Part Number identifies the specific configuration for that printer.
This chart shows the configurations that are available:
PART NUMBER DESCRIPTION
Z1_ -__00________ BASE UNIT
__1-_____ ______ Single-Sided
SMART CARD OPTIONS
___-0___________ None
MAG ENCODER OPTIONS
___-_0__________ None
___-_M__________ ISO HiCo/LoCo Mag S/W-selectable
Interface
___-___0________ USB only
___-___C________ USB and 10/100 Ethernet
SOFTWARE / KIT
___-____0_______ None
___-____G_______
Starter Kit: Monochrome ( Incl: 1 Monochrome Ribbon,
100 PVC Cards )
___-____H_______ Starter Kit: Color ( Incl: 1 YMCKO Ribbon, 100 PVC Cards )
MISCELLANEOUS
___-_____000____ None
___-_______G____ Buy America Act
COUNTRY CODE (power cord option)
___-________00__ No power cords
___-________AP__ Britain
___-________US__ Americas
___-________BR__ Brazil
_ _ _ - _ _ _ _ _ _ _ _ E M _ _ EMEA (Europe, the Middle East, and Africa)
___-________AU__ Australia
___-________CN__ China
___-________IN__ India
___-________TW__ Taiwan
___-________JP__ Japan
CUSTOM CODE
___-__________00 State / Province / Project / Other
ACCESSORIES
P1031925-100 CardSense single-card feed kit, field-upgradable option
105999-302 Cleaning Kit: 4 printer-path and 4 feeder cleaning cards

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm