Zebra ZXP 1 Series User Manual

64 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
2: Installation and Setup
Changing the Printer Driver Options
Image Control
Allows you to adjust the image colors; these adjustments apply to the entire card, not just
photographic image.
- Intensity - increase or decrease the image intensity by moving the Black, Yellow,
Magenta, and Cyan slider bars left or right. This will change the overall lightness or
darkness of the image. Move the slider to the right (0 to 100) to increase the intensity
and to the left (0 to -100) to decrease the intensity. Note that color ribbon wrinkling
can be eliminated by reducing the intensity.
Use the Restore Defaults button to reset the settings to the driver defaults.
Note • Printed colors can appear different than displayed colors; the following controls
allow you to optimize the printed results.

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm