Zebra ZXP 1 Series - Page 72

66 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
2: Installation and Setup
Changing the Printer Driver Options
• Direct Encoding - For writing data and reading encoded data.
Track selection:
- To read encoded data: Click on the checkboxes to select Track 1, Track 2, and/or
Track 3; click on the Read button, and validate the data read.
- To write data: Click on the checkboxes to select Track 1, Track 2, and/or Track 3;
enter the data to be written; and click on the Encode button.
- To eject the card: Click on the Eject Card button to eject the card.
The Restore Defaults button to reset the settings to the original values.